The cement trailer equipment with 12cbm Double-cylinder air compressor，and the tank capacity up to 90cbm.The tank body can be selected from carbon steel and aluminum alloy according to the requirements of sustainability.
Cement Tank Trailer
Thickness：Tank body: 5mm; End plate: 6mm
Compressor: 12 cubic double cylinder Fuda brand
Suspension: Mechanical suspension reforced type
What is cement tank trailer--Cement Trailer Use Guide
Specific application of powder tank truck air compressor
1. Do not run at overspeed and overpressure when driving a bulk cement tank trailer. Overspeed and overpressure will seriously damage the air compressor. The maximum speed of this machine is shown in the main technical parameter table, and the working pressure is 0.2MPa.
2. Do not start or stop the air compressor quickly, but increase or decrease slowly, otherwise, the pressure will damage the air compressor.
3. Do not change the rotation direction of the air compressor, otherwise, the oil pump will not supply oil will seriously damage the machine.
4. Do not stop the air compressor before decompression, otherwise, the powder and granular materials may flow back into the cylinder, causing serious damage to the air compressor.
Specific application of powder tank truck oil standard and lubrication
5. Check the oil level before starting. The oil level must not be lower than the lower limit of the oil standard; it is often necessary to check whether the oil pump is supplying oil. If it does not supply oil, it should be stopped immediately for inspection, otherwise the lack of oil will seriously damage the air compressor. 6. It is necessary to replace the lubricant on schedule. After using the new machine for 30 hours, drain the oil from the crankcase, clean the inside of the crankcase and the oil filter, and then change the oil. After that, change the oil once a year as described above.
7. Check and clean the oil strainer. Under normal circumstances, check and clean once a quarter. If the machine usage is high, check and clean once a month.
8. The lubricant used in this machine is CD40 diesel engine oil. It is forbidden to mix lubricants of different brands, otherwise the deterioration of the lubricant will affect the lubrication effect.
9. Maintain and clean the air filter every 30 hours of work. While rotating the filter element, compressed air with a pressure of less than 0.6 MPa is blown from the inside to the outside. After five times of maintenance, please replace the new filter element. Never use oil or water to clean the filter element.