Aug 28, 2018
In China, the use of trailer ropes is very important for trailer rescue. Generally, the trailer ropes are made from cloth tape, steel wire and nylon ropes, and have various lengths, generally ranging from 3M to 10M in length.
1. Find the traction vehicle rear and traction vehicle in front of the trailer hook position. A lot of design at the bottom of the bumper car trailer hook position, usually in the vehicle manual marked a clear position, the owner can also be found by looking at front and rear bumper has a hidden space, used here round or square lid cover the position location is car trailer hooks.
2. Some car trailer hooks are split and need to be assembled when the trailer is used for rescue.
3. Install the trailer tools. Whether choose soft or hard trailer tools, when installation are intended to ensure that the connection is firm and reliable when the car hook, the need of towing hook designed with safety lock locking in place. In a trailer to check again before driving connection. Before and after is not installed on both ends of the towing hook soft trailer rope to bind slipknot when use, if after shooting knot after the pull of the big traction trailer rope is very difficult to solve.
4. The tractor starts with 1 gear to ensure sufficient traction with large torque, and at the same time, the tractor needs to control the speed to maintain a smooth running and increase power output when it feels a little resistance.